Company Information
AIRHORSE
In the plastics manufacturing industry, a "clean and stable" supply of compressed air is sometimes more important than a new machine. It not only drives the equipment to operate, but also determines the quality and consistency of injection-molded products.
If there are more impurities in the air source, it may cause the product to bubble and shrink;
large fluctuations in air pressure can also lead to chaos in the production schedules and and cause energy consumption to soar.
In order to convert every gram of raw material into a higher-quality product, more and more enterprises are beginning to pay attention to the energy conservation and purity of their air system.
Even Dongguan's certain plastic products company is no exception - in their production upgrade project, they chose the AirHorse 75KW two-stage screw air compressor, providing an efficient, energy-saving and reliable air source solution to create their own "green productivity".
Two-stage compression, highly efficient and energy-saving and more powerful!
Traditional air compressors rely on "single operation" to compress air, which results in high energy consumption and a large amount of heat.
The AirHorse two-stage screw air compressor adopts a "two-stage synergy" design - the air is compressed in two steps, resulting in lower energy consumption, more stable output, an increase of approximately 15% in exhaust volume, and an energy efficiency improvement of 10% to 15%.
In combination with the low-speed main air end and the high-precision gear transmission system, the machine operates more quietly, with less vibration, and maintains consistent stable performance.
In short: energy-saving, reliable, and more durable.
Intelligent frequency conversion: it proactively saves electricity.
This machine is not only "powerful at its job", but also exceptionally "intelligent".The air compressor is equipped with an intelligent variable frequency control system that automatically adjusts the RPM according to actual air consumption—outputting at full speed when air consumption is high and automatically reducing speed to save energy when air consumption is low. There is no need for human supervision and no electricity waste. The annual energy-saving rate can be increased by more than 30%! Combined with a remote monitoring system, users can view the operating status, energy consumption trends, and maintenance reminders in real time, gaining complete control
Stable and reliable, ensuring the smooth operation of production.
Plastic product manufacturing enterprises have extremely high requirements for equipment continuity. Even a minute of unstable air pressure can lead to production line shutdown and losses.
The motor and cooling system of AirHorse two-stage screw air compressor have been optimally designed - featuring high-temperature-resistant bearings, flexible sealing structures, along with large-volume, low-noise fan and efficient radiator. This ensure stable operation and continuous output of high-quality compressed air even under high temperature, high humidity, and high load conditions.
With low noise and quiet operation, it can be installed directly in the production workshop, making "green production" not only energy-saving but also comfortable.
After the project went into operation, the enterprise manager made the following assessment: "This AirHorse machine really puts our minds at ease. The energy consumption has decreased, the air supply has become more stable, and the yield of injection molded products has significantly improved. Previously, the old machines often needed adjustment, but now we basically don't have to worry about it."
Energy-saving, stable, intelligent, and environmentally friendly—these are the reasons why AirHorse two-stage screw air compressors has gained the trust of the market.
From energy-efficient two-stage models to intelligent control and remote monitoring systems, AirHorse has always been driving green manufacturing with innovative technologies. In the future, we will continue to collaborate with more manufacturing enterprises to make every cubic of air purer and more efficient, injecting stronger "green power" into Chinese manufacturing.
In the plastics manufacturing industry, a "clean and stable" supply of compressed air is sometimes more important than a new machine. It not only drives the equipment to operate, but also determines the quality and consistency of injection-molded products.
If there are more impurities in the air source, it may cause the product to bubble and shrink;
large fluctuations in air pressure can also lead to chaos in the production schedules and and cause energy consumption to soar.
In order to convert every gram of raw material into a higher-quality product, more and more enterprises are beginning to pay attention to the energy conservation and purity of their air system.
Even Dongguan's certain plastic products company is no exception - in their production upgrade project, they chose the AirHorse 75KW two-stage screw air compressor, providing an efficient, energy-saving and reliable air source solution to create their own "green productivity".
Two-stage compression, highly efficient and energy-saving and more powerful!
Traditional air compressors rely on "single operation" to compress air, which results in high energy consumption and a large amount of heat.
The AirHorse two-stage screw air compressor adopts a "two-stage synergy" design - the air is compressed in two steps, resulting in lower energy consumption, more stable output, an increase of approximately 15% in exhaust volume, and an energy efficiency improvement of 10% to 15%.
In combination with the low-speed main air end and the high-precision gear transmission system, the machine operates more quietly, with less vibration, and maintains consistent stable performance.
In short: energy-saving, reliable, and more durable.
Intelligent frequency conversion: it proactively saves electricity.
This machine is not only "powerful at its job", but also exceptionally "intelligent".The air compressor is equipped with an intelligent variable frequency control system that automatically adjusts the RPM according to actual air consumption—outputting at full speed when air consumption is high and automatically reducing speed to save energy when air consumption is low. There is no need for human supervision and no electricity waste. The annual energy-saving rate can be increased by more than 30%! Combined with a remote monitoring system, users can view the operating status, energy consumption trends, and maintenance reminders in real time, gaining complete control
Stable and reliable, ensuring the smooth operation of production.
Plastic product manufacturing enterprises have extremely high requirements for equipment continuity. Even a minute of unstable air pressure can lead to production line shutdown and losses.
The motor and cooling system of AirHorse two-stage screw air compressor have been optimally designed - featuring high-temperature-resistant bearings, flexible sealing structures, along with large-volume, low-noise fan and efficient radiator. This ensure stable operation and continuous output of high-quality compressed air even under high temperature, high humidity, and high load conditions.
With low noise and quiet operation, it can be installed directly in the production workshop, making "green production" not only energy-saving but also comfortable.
After the project went into operation, the enterprise manager made the following assessment: "This AirHorse machine really puts our minds at ease. The energy consumption has decreased, the air supply has become more stable, and the yield of injection molded products has significantly improved. Previously, the old machines often needed adjustment, but now we basically don't have to worry about it."
Energy-saving, stable, intelligent, and environmentally friendly—these are the reasons why AirHorse two-stage screw air compressors has gained the trust of the market.
From energy-efficient two-stage models to intelligent control and remote monitoring systems, AirHorse has always been driving green manufacturing with innovative technologies. In the future, we will continue to collaborate with more manufacturing enterprises to make every cubic of air purer and more efficient, injecting stronger "green power" into Chinese manufacturing.
Recommend
