Company Information
AIRHORSE
In modern tech enterprises, compressed air acts as the "invisible driving force" of production lines—unseen yet vital. Air quality and pressure stability directly impact equipment efficiency and product quality. Fluctuating or insufficient air pressure can reduce productivity, drive up energy consumption, increase maintenance frequency, and even compromise operational safety.
Recently, an Airhorse 7.5kW permanent magnet variable speed drive (PM VSD) screw air compressor was commissioned at a technology company in Shijiazhuang, providing a stable, efficient, and eco-friendly power source for its production line. This supports the company in achieving its goals of production upgrade, energy savings, and emission reduction.
Since the project launched, the company has gained significantly greater control over its production line. Machine stability, operational efficiency, and energy-saving performance have all delivered impressive and visible results.
Smart Inverter Control – Air Output Adjusts On Demand
Traditional air compressors often run at full speed once started, consuming significant energy even when production lines are only lightly loaded—resulting in unnecessary power usage.
Equipped with a permanent magnet inverter motor and an intelligent control system, Airhorse compressors automatically adjust their speed based on real-time air demand:
During peak usage: They deliver full power while maintaining stable air pressure.
During idle or low-demand periods: They intelligently reduce speed, saving energy with zero manual intervention.
In short, Airhorse compressors make energy efficiency automatic—they "do the math" on their own. With yearly energy savings ranging from 20% to 35%, the impact is clearly reflected in your electricity bills.
Reliability & Durability – Powering Uninterrupted Production
In high-tech manufacturing, production lines often operate around the clock, and even minor fluctuations in the air supply can disrupt workflow.
Airhorse compressors are engineered with a low-speed, large-rotor design combined with precision-optimized components. Built to withstand high temperatures and humidity, they operate at lower rotational speeds, resulting in reduced mechanical wear, quieter performance, and extended service life. Day or night, in extreme heat or cold, they consistently deliver clean, stable compressed air.
Supported by a high-capacity cooling system and low-noise fans, the compressor maintains quiet, low-temperature, and steady performance even under continuous operation. In on-site tests, even when placed in the center of a production floor, Airhorse compressors operate at noise levels more than 10% lower than comparable models in the same power range — creating a noticeably quieter, more comfortable working environment without the need for additional soundproofing.
Smart Monitoring + Predictive Maintenance for Hassle-free Operation
Airhorse compressors not only excel in hardware stability but also lead the industry in intelligent management. Each unit is equipped with a comprehensive smart monitoring system that collects core data such as temperature, pressure, current, and air volume in real time, enabling 24/7 operational oversight. Like a "self-aware" engineer, every compressor keeps track of its own operational health, providing complete transparency into the air system’s performance.
When abnormal parameters occur, the system immediately sends out alerts, helping users quickly identify issues and prevent minor faults from escalating into unexpected downtime. Additionally, based on runtime and load conditions, the system automatically prompts for scheduled maintenance and highlights key components, guiding maintenance personnel to perform precise upkeep. This truly embodies the principle of "equipment awareness, proactive response."
This approach not only significantly reduces the frequency and cost of manual inspections but also makes operations and maintenance more efficient, scientific, and controllable. An efficient, intelligent, and stable air system forms the true foundation of green production — it is more than just a power source; it is the core driver of energy efficiency, intelligence, and sustainability in modern manufacturing.
Since the Airhorse compressor was put into operation, the company has noticed significant improvements:
Stable air pressure ensures smooth production line operation, eliminating frequent equipment start-ups and shutdowns.
Electricity bills clearly reflect energy savings, with a substantial reduction in overall energy consumption.
The smart monitoring system simplifies maintenance, providing early warnings for potential issues and reducing the need for manual intervention.
Moving forward, we will continue to partner with more technology and manufacturing enterprises, ensuring every cubic meter of air is stable and efficient. Together, we will inject more sustainable and intelligent "green power" into the future of Chinese manufacturing.
In modern tech enterprises, compressed air acts as the "invisible driving force" of production lines—unseen yet vital. Air quality and pressure stability directly impact equipment efficiency and product quality. Fluctuating or insufficient air pressure can reduce productivity, drive up energy consumption, increase maintenance frequency, and even compromise operational safety.
Recently, an Airhorse 7.5kW permanent magnet variable speed drive (PM VSD) screw air compressor was commissioned at a technology company in Shijiazhuang, providing a stable, efficient, and eco-friendly power source for its production line. This supports the company in achieving its goals of production upgrade, energy savings, and emission reduction.
Since the project launched, the company has gained significantly greater control over its production line. Machine stability, operational efficiency, and energy-saving performance have all delivered impressive and visible results.
Smart Inverter Control – Air Output Adjusts On Demand
Traditional air compressors often run at full speed once started, consuming significant energy even when production lines are only lightly loaded—resulting in unnecessary power usage.
Equipped with a permanent magnet inverter motor and an intelligent control system, Airhorse compressors automatically adjust their speed based on real-time air demand:
During peak usage: They deliver full power while maintaining stable air pressure.
During idle or low-demand periods: They intelligently reduce speed, saving energy with zero manual intervention.
In short, Airhorse compressors make energy efficiency automatic—they "do the math" on their own. With yearly energy savings ranging from 20% to 35%, the impact is clearly reflected in your electricity bills.
Reliability & Durability – Powering Uninterrupted Production
In high-tech manufacturing, production lines often operate around the clock, and even minor fluctuations in the air supply can disrupt workflow.
Airhorse compressors are engineered with a low-speed, large-rotor design combined with precision-optimized components. Built to withstand high temperatures and humidity, they operate at lower rotational speeds, resulting in reduced mechanical wear, quieter performance, and extended service life. Day or night, in extreme heat or cold, they consistently deliver clean, stable compressed air.
Supported by a high-capacity cooling system and low-noise fans, the compressor maintains quiet, low-temperature, and steady performance even under continuous operation. In on-site tests, even when placed in the center of a production floor, Airhorse compressors operate at noise levels more than 10% lower than comparable models in the same power range — creating a noticeably quieter, more comfortable working environment without the need for additional soundproofing.
Smart Monitoring + Predictive Maintenance for Hassle-free Operation
Airhorse compressors not only excel in hardware stability but also lead the industry in intelligent management. Each unit is equipped with a comprehensive smart monitoring system that collects core data such as temperature, pressure, current, and air volume in real time, enabling 24/7 operational oversight. Like a "self-aware" engineer, every compressor keeps track of its own operational health, providing complete transparency into the air system’s performance.
When abnormal parameters occur, the system immediately sends out alerts, helping users quickly identify issues and prevent minor faults from escalating into unexpected downtime. Additionally, based on runtime and load conditions, the system automatically prompts for scheduled maintenance and highlights key components, guiding maintenance personnel to perform precise upkeep. This truly embodies the principle of "equipment awareness, proactive response."
This approach not only significantly reduces the frequency and cost of manual inspections but also makes operations and maintenance more efficient, scientific, and controllable. An efficient, intelligent, and stable air system forms the true foundation of green production — it is more than just a power source; it is the core driver of energy efficiency, intelligence, and sustainability in modern manufacturing.
Since the Airhorse compressor was put into operation, the company has noticed significant improvements:
Stable air pressure ensures smooth production line operation, eliminating frequent equipment start-ups and shutdowns.
Electricity bills clearly reflect energy savings, with a substantial reduction in overall energy consumption.
The smart monitoring system simplifies maintenance, providing early warnings for potential issues and reducing the need for manual intervention.
Moving forward, we will continue to partner with more technology and manufacturing enterprises, ensuring every cubic meter of air is stable and efficient. Together, we will inject more sustainable and intelligent "green power" into the future of Chinese manufacturing.
Recommend
